Skip to content

Security-Role-Assignment Jboss Tools

Developing Web Applications, Servlets, and JSPs for WebLogic Server

weblogic.xml Deployment Descriptor Elements

This document provides a complete reference for the elements in the WebLogic Server-specific deployment descriptor weblogic.xml. If your Web application does not contain a weblogic.xml deployment descriptor, WebLogic Server automatically selects the default values of the deployment descriptor elements. To see the schema for , go to http://www.bea.com/ns/weblogic/920/weblogic-web-app.xsd.

The following sections describe the complex deployment descriptor elements that can be defined in the weblogic.xml deployment descriptor under the root element :

 


description

The description element is a text description of the Web application.

 


weblogic-version

The element indicates the version of WebLogic Server on which this Web application (as defined in the root element ) is intended to be deployed. This element is informational only and is not used by WebLogic Server.

 


security-role-assignment

The element declares a mapping between a Web application security role and one or more principals in WebLogic Server, as shown in the following example.

    PayrollAdmin    Tanya    Fred    system

You can also use it to mark a given role as an externally defined role, as shown in the following example:

    roleadmin    
Notes:In the element, either or must be defined. Both cannot be omitted.

The following table describes the elements you can define within a element.

Element

Required
Optional

Description

Required

Specifies the name of a security role.

Required if is not defined.

Specifies the name of a principal that is defined in the security realm. You can use multiple elements to map principals to a role. For more information on security realms, see Managing WebLogic Security.

Required if is not defined.

Specifies that a particular security role is defined globally in a security realm; WebLogic Server uses this security role as the principal name, rather than looking it up in a global realm. When the security role and its principal-name mapping are defined elsewhere, this is used as an indicative placeholder.

Note:If you do not define a security-role-assignment element and its sub-elements, the Web application container implicitly maps the role name as a principal name and logs a warning. The EJB container does not deploy the module if mappings are not defined.
Note:Consider the following usage scenarios for the role name is “role_xyz”
  • If you map“role_xyz to user “joe” in weblogic.xml, role_xyz becomes a local role.
  • If you specify role_xyz as an externally defined role, it becomes global (it refers to the role defined at the realm level).
  • If you do not define a security-role-assignment element, role_xyz becomes a local role, and the Web application container creates an implicit mapping to it and logs a warning.

 


run-as-role-assignment

The run-as-role-assignment element maps a run-as role name (a sub-element of the servlet element) in web.xml to a valid user name in the system. The value can be overridden for a given servlet by the run-as-principal-name element in the servlet-descriptor. If the run-as-role-assignment is absent for a given role name, the Web application container uses the first principal-name defined in the security-role-assignment. The following example illustrates how to use the run-as-role-assignment element.

<run-as-role-assignment>
    <role-name>RunAsRoleName</role-name>
    <run-as-principal-name>joe</run-as-principal-name>
</run-as-role-assignment>

The following table describes the elements you can define within a element.

Element

Required
Optional

Description

Required

Specifies the name of a security role.

Required

Specifies the name of a principal.

 


resource-description

The element is used to map the JNDI name of a server resource to an EJB resource reference in WebLogic Server.

The following table describes the elements you can define within a element

Element

Required/
Optional

Description

Required

Specifies the name of a resource reference.

Required

Specifies a JNDI name for the resource.

.

 


resource-env-description

The element maps a , declared in the deployment descriptor, to the JNDI name of the server resource it represents.

The following table describes the elements you can define within a element.

Element

Required/
Optional

Description

Required

Specifies the name of a resource environment reference.

Required

Specifies a JNDI name for the resource environment reference.

 


ejb-reference-description

The following table describes the elements you can define within a element.

Element

Required/
Optional

Description

Required

Specifies the name of an EJB reference used in your Web application.

Required

Specifies a JNDI name for the reference.

 


service-reference-description

The following table describes the elements you can define within a element.

Element

Required/
Optional

Description

  

  

<call-property>

 

The <call-property> element has the following sub-elements:

  • <name>
  • <value>

<port-info>

 

The <port-info> element has the following sub-elements:

  • <port-name>
  • <stub-property>
  • <call-property>

 


session-descriptor

The elements that define parameters for servlet sessions.

Note:When initializing session context, most session descriptors from take precedence over those from , with the default value being used for undefined properties regardless if it exists in . However, when both XML files are being used, the following properties in are honored first:
      • Element Name

        Default Value

        Value

        3600

        Sets the time, in seconds, that WebLogic Server waits before timing out a session. The default value is 3600 seconds.

        On busy sites, you can tune your application by adjusting the timeout of sessions. While you want to give a browser client every opportunity to finish a session, you do not want to tie up the server needlessly if the user has left the site or otherwise abandoned the session.

        Note:The value of the element (defined in minutes) in web.xml overrides the value of defined in both weblogic.xml and weblogic-application.xml. The value of in weblogic.xml overrides the value defined in weblogic-application.xml.

        Sets the time, in seconds, that WebLogic Server waits between doing house-cleaning checks for timed-out and invalid sessions, and deleting the old sessions and freeing up memory. Use this element to tune WebLogic Server for best performance on high traffic sites.

        The default value is 60 seconds.

        false

        Enables Web applications to share HTTP sessions when the value is set to at the application level.

        This element is ignored if turned on at the Web application level.

        debug-enabled

        false

        Enables the debugging feature for HTTP sessions.

        The default value is false.

        52

        Sets the size of the session ID.

        The minimum value is 8 bytes and the maximum value is Integer.MAX_VALUE.

        If you are writing a WAP application, you must use URL rewriting because the WAP protocol does not support cookies. Also, some WAP devices have a 128-character limit on URL length (including attributes), which limits the amount of data that can be transmitted using URL re-writing. To allow more space for attributes, use this attribute to limit the size of the session ID that is randomly generated by WebLogic Server.

        You can also limit the length to a fixed 52 characters, and disallow special characters, by setting the WAPEnabled attribute. For more information, see URL Rewriting and Wireless Access Protocol in Developing Web Applications for WebLogic Server.

        tracking-enabled

        true

        Enables session tracking between HTTP requests.

        cache-size

        1028

        Sets the cache size for JDBC and file-persistent sessions.

        max-in-memory-sessions

        -1

        Sets the maximum limit for memory/replicated sessions.

        Without the ability to configure bound in-memory servlet session use, as new sessions are continually created, the server eventually throws out of memory. To protect against this, WebLogic Server provides a configurable bound on the number of sessions created. When this number is exceeded, the weblogic.servlet.SessionCreationException occurs for each attempt to create a new session. This feature applies to both replicated and non-replicated in-memory sessions.

        To configure bound in-memory servlet session use, you set the limitation in the max-in-memory-sessions element.

        The default is -1 (unlimited).

        Use of session cookies is enabled by default and is recommended, but you can disable them by setting this property to . You might turn this option off to test.

        Defines the session tracking cookie name. Defaults to if not set. You may set this to a more specific name for your application.

        null

        Defines the session tracking cookie path.

        If not set, this attribute defaults to (slash), where the browser sends cookies to all URLs served by WebLogic Server. You may set the path to a narrower mapping, to limit the request URLs to which the browser sends cookies.

        null

        Specifies the domain for which the cookie is valid. For example, setting to returns cookies to any server in the domain.

        The domain name must have at least two components. Setting a name to or is not valid.

        If not set, this attribute defaults to the server that issued the cookie.

        For more information, see in the Servlet specification from Sun Microsystems.

        null

        Specifies the comment that identifies the session tracking cookie in the cookie file.

        Tells the browser to only send the cookie back over an HTTPS connection. This ensures that the cookie ID is secure and should only be used on Websites that use HTTPS. Session Cookies over HTTP no longer work if this feature is enabled.

        You should disable the element if you intend to use this feature.

        -1

        Sets the life span of the session cookie, in seconds, after which it expires on the client.

        The default value is -1 (unlimited)

        For more information about cookies, see Using Sessions and Session Persistence.

        Sets the persistent store method to one of the following options:

        • —Disables persistent session storage.
        • —Same as , but session data is replicated across the clustered servers.
        • replicated_if_clustered—If the Web application is deployed on a clustered server, the in-effect will be replicated. Otherwise, is the default.
        • sync-replication-across-cluster—The replication will occur synchronously across the cluster.
        • async-replication-across-cluster—The replication will occur asynchronously across the cluster.
        • —Uses file-based persistence (See also persistent-store-dir).
        • —Uses a database to store persistent sessions. (see also persistent-store-pool).
        • cookie—All session data is stored in a cookie in the user’s browser.

        Sets the name of the cookie used for cookie-based persistence. The cookie carries the session state, which should not be shared between Web applications.

        For more information, see Using Cookie-Based Session Persistence.

        Specifies the storage directory used for file-based persistence

        Ensure that you have enough disk space to store the number of valid sessions multiplied by the size of each session. You can find the size of a session by looking at the files created in the . Note that the size of each session can vary as the size of serialized session data changes.

        Each server instance has a default persistent file store that requires no configuration. Therefore, if no directory is specified, a default store is automatically created in the directory. However, the default store is not shareable among clustered servers.

        You can make file-persistent sessions clusterable by creating a custom persistent store in a directory that is shared among different servers. However, this requires you to create this directory manually.

        Specifies the name of a JDBC connection pool to be used for persistence storage.

        Specifies the database table name used to store JDBC-based persistent sessions. This applies only when is set to jdbc.

        The element is used when you choose a database table name other than the default.

        jdbc-column-name-max-inactive-interval

         

        Serves as an alternative name for the wl_max_inactive_interval column name. This jdbc-column-name-max-inactive-interval element applies only to JDBC-based persistence. It is required for certain databases that do not support long column names.

        120

        Note: This is a deprecated item for this release.

        Sets the time, in seconds, that WebLogic Server waits before timing out a JDBC connection, where x is the number of seconds between.

        true

        Enables URL rewriting, which encodes the session ID into the URL and provides session tracking if cookies are disabled in the browser.

        http-proxy-caching-of-cookies

        true

        When set to , WebLogic Server adds the following header with the following response:

        “Cache-control: no-cache=set-cookie”

        This indicates that the proxy caches do not cache the cookies.

        The latest servlet specification requires containers to encode the session ID in path parameters. Certain Web servers do not work well with path parameters. In such cases, the encode-session-id-in-query-params element should be set to true. (The default is .)

         

        Used in ServletSessionRuntimeMBean. The getMainAttribute() of the ServletSessionRuntimeMBean returns the session attribute value using this string as a key.

        Example: user-name

        This element is useful for tagging session runtime information for different sessions.

 


jsp-descriptor

The element specifies a list of configuration parameters for the JSP compiler. The following table describes the elements you can define within a element..

Element

Required/
Optional

Description

Sets the interval, in seconds, at which WebLogic Server checks to see if JSP files have changed and need recompiling. Dependencies are also checked and recursively reloaded if changed.

  • The value -1 means never check the pages. This is the default value in a production environment.
  • The value 0 means always check the pages.
  • The value 1 means check the pages every second. This is the default value in a development environment.

In a production environment where changes to a JSP are rare, consider changing the value of pageCheckSeconds to 60 or greater, according to your tuning requirements.

When set to true, WebLogic Server automatically precompiles all modified JSPs when the Web application is deployed or re-deployed or when starting WebLogic Server.

precompile-continue

false

When set to true, WebLogic Server continues precompiling all modified JSPs even if some of those JSPs fail during compilation. Only takes effect when precompile is set to true.

Saves the Java files that are generated as an intermediary step in the JSP compilation process. Unless this parameter is set to , the intermediate Java files are deleted after they are compiled.

When set to , debugging information is printed out to the browser, the command prompt, and WebLogic Server log file.

internally generated directory

The name of a directory where WebLogic Server saves the generated Java and compiled class files for a JSP.

print-nulls

null

When set to false, this parameter ensures that expressions with “null” results are printed as “ “.

backward-compatible

true

When set to , backward compatibility is enabled.

For more information, see Backwards Compatibility Flags.

Default encoding of your platform

Specifies the default character set used in the JSP page. Use standard Java character set nameshttp://java.sun.com/j2se/1.5.0/docs/guide/intl/encoding.doc.htm).

If not set, this attribute defaults to the encoding for your platform.

A JSP page directive (included in the JSP code) overrides this setting. For example:

Specifies the package prefix into which all JSP pages are compiled.

When true, upon the first request for a JSP the newly created JspStub is mapped to the exact request. If exactMapping is set to false, the Web application container generates non-exact url mapping for JSPs. exactMapping allows path info for JSP pages.

default-file-name

true

The default file name in which WebLogic Server saves the generated Java and compiled class files for a JSP.

rtexprvalue-jsp-param-name

Allows runtime expression values in the name attribute of the tag. It is set to by default.

 


auth-filter

The auth-filter element specifies an authentication filter HttpServlet class.

Note:This is a deprecated element for the current release. Instead, use servlet authentication filters.

 


container-descriptor

The element specifies a list of parameters that affect the behavior of the Web application.

check-auth-on-forward

Add the element when you want to require authentication of forwarded requests from a servlet or JSP. Omit the tag if you do not want to require re-authentication. For example:

<container-descriptor>
    <check-auth-on-forward/>
</container-descriptor>
Note:As a best practice, BEA does not recommend that you enable the check-auth-on-forward property.

filter-dispatched-requests-enabled

The element controls whether or not filters are applied to dispatched requests. The default value is false.

Note:Because 2.4 servlets are backward compatible with 2.3 servlets (per the 2.4 specification), when 2.3 descriptor elements are detected by WebLogic Server, the element defaults to true.

redirect-with-absolute-url

The element controls whether the method redirects using a relative or absolute URL. Set this element to if you are using a proxy HTTP server and do not want the URL converted to a non-relative link.

The default behavior is to convert the URL to a non-relative link.

user readable data used in a redirect.

index-directory-enabled

The <index-directory-enabled> element controls whether or not to automatically generate an HTML directory listing if no suitable index file is found.

The default value is (does not generate a directory). Values are or .

index-directory-sort-by

The <index-directory-sort-by> element defines the order in which the directory listing generated by weblogic.servlet.FileServlet is sorted. Valid sort-by values are NAME, LAST_MODIFIED, and SIZE. The default sort-by value is NAME.

servlet-reload-check-secs

The <servlet-reload-check-secs> element defines whether a WebLogic Server will check to see if a servlet has been modified, and if it has been modified, reloads it.

  • The value -1 means never check the servlets. This is the default value in a production environment.
  • The value 0 means always check the servlets.
  • The value 1 means check the servlets every second. This is the default value in a development environment.

A value specified in the console will always take precedence over a manually specified value.

resource-reload-check-secs

The <resource-reload-check-secs> element is used to perform metadata caching for cached resources that are found in the resource path in the Web application scope. This parameter identifies how often WebLogic Server checks whether a resource has been modified and if so, it reloads it.

  • The value -1 means never reload. This is the default value in a production environment.
  • The value 0 means always reload.
  • The value 1 means reload every second. This is the default value in a development environment.

Values specified for this parameter using the Admin Console are given precedence.

single-threaded-servlet-pool-size

The <single-threaded-servlet-pool-size> element defines the size of the pool used for SingleThreadMode instance pools. The default value is 5.

Note:SingleThreadMode instance pools are deprecated in this release.

session-monitoring-enabled

The <session-monitoring-enabled> element, if set to true, allows runtime MBeans to be created for sessions. When set to false, the default value, runtime MBeans are not created. A value specified in the console takes precedence over a value set manually.

save-sessions-enabled

The <save-sessions-enabled> element controls whether session data is cleaned up during redeploy or undeploy. It affects memory and replicated sessions. Setting the value to true means session data is saved. Setting to false means session data will be destroyed when the Web application is redeployed or undeployed. The default is false.

prefer-web-inf-classes

The <prefer-web-inf-classes> element, if set to true, will cause classes located in the WEB-INF directory of a Web application to be loaded in preference to classes loaded in the application or system classloader. The default value is false. A value specified in the console will take precedence over a value set manually.

default-mime-type

The <default-mime-type> element default value is null. This element allows the user to specify the default mime type for a content-type for which the extension is not mapped.

client-cert-proxy-enabled

The <client-cert-proxy-enabled> element default value is true. When set to true, WebLogic Server passes identity certificates from the clients to the backend servers. Also, WebLogic Server is notified whether to honor or discard the incoming WL-Proxy-Client-Cert header.

A proxy-server plugin encodes each identity certification in the WL-Proxy-Client-Cert header and passes it to the backend WebLogic Server instances. Each WebLogic Server instance takes the certificate information from the header, ensured it came from a secure source, and uses that information to authenticate the user. For the background WebLogic Server instances, this parameter must be set to true (either at the cluster/server level or at the Web application level).

If you set this element to true, use a weblogic.security.net.ConnectionFilter to ensure that each WebLogic Server instance accepts connections only from the machine on which the proxy-server plugin is running. If you specify true without using a connection filter, a potential security vulnerability is created because the WL-Proxy-Client-Cert header can be spoofed.

relogin-enabled

The <relogin-enabled> element is a backward compatibility parameter. If a user has logged in already and tries to access a resource for which s/he does not have privileges, a FORBIDDEN (403) response occurs.

allow-all-roles

In the security-constraints elements defined in web.xml descriptor of a Web application, the auth-constraint element indicates the user roles that should be permitted access to this resource collection. Here role-name = "*" is a compact syntax for indicating all roles in the Web application. In past releases, role-name = "*" was treated as all users/roles defined within the realm.

This allow-all-roles element is a backward compatibility switch to restore old behavior. The default behavior is to allow all roles defined in the Web application. The value specified in weblogic-xml takes precedence over the value defined in the WebAppContainerMBean.

native-io-enabled

To use native I/O while serving static files with weblogic.servlet.FileServlet, which is implicitly registered as the default servlet, set native-io-enabled to true. (The default value is false.) native-io-enabled element applies only on Windows.

minimum-native-file-size

The minimum-native-file-size element applies only when native-io-enabled is set to true. It sets the minimum file size for using native I/O. If the file being served is larger than this value, native I/O is used. If you do not set this value, the default value used is 4K.

disable-implicit-servlet-mapping

When the disable-implicit-servlet-mappings flag is set to true, the Web application container does not create implicit mappings for internal servlets (*.jsp, *.class, and so on); only for the default servlet mapping. A typical use case for turning off implicit servlet mappings would be when configuring HttpClusterServlet or HttpProxyServlet.

The default value is false.

optimistic-serialization

When optimistic-serialization is turned on, WebLogic Server does not serialize-deserialize context and request attributes upon getAttribute(name) when the request is dispatched across servlet contexts.

This means that you must make sure that the attributes common to Web applications are scoped to a common parent classloader (application scoped) or you must place them in the system classpath if the two Web applications do not belong to the same application.

When optimistic-serialization is turned off (default value), WebLogic Server serialize-deserializes context and request attributes upon getAttribute(name) to avoid the possibility of ClassCastExceptions.

The optimistic-serialization value can also be specified at domain level in the WebAppContainerMBean, which applies for all Web applications. The value in weblogic.xml, if specified, overrides the domain level value.

The default value is false.

require-admin-traffic

The element defines whether traffic should go through the administration channel. When set to traffic is allowed to go through the administration channel. Otherwise, traffic can only go through administration channel when the Web application is in administrative mode. For example:

<container-descriptor>
    <require-admin-traffic>true</require-admin-traffic>
</container-descriptor>

 


charset-params

The <charset-params> element is used to define code set behavior for non-unicode operations. For example:

<charset-params>
    <input-charset>
        <resource-path>/*</resource-path>
        <java-charset-name>UTF-8</java-charset-name>
    </input-charset>
</charset-params>

input-charset

Use the element to define which character set is used to read and data. For example:

<input-charset>
    <resource-path>/foo</resource-path>
    <java-charset-name>SJIS</java-charset-name>
</input-charset>

For more information, see Determining the Encoding of an HTTP Request.

The following table describes the elements you can define within a element

Element

Required/
Optional

Description

Required

A path which, if included in the URL of a request, signals WebLogic Server to use the Java character set specified by .

Required

Specifies the Java characters set to use.

.

charset-mapping

Use the element to map an IANA character set name to a Java character set name. For example:

<charset-mapping>
    <iana-charset-name>Shift-JIS</iana-charset-name>
    <java-charset-name>SJIS</java-charset-name>
</charset-mapping>

For more information, see Mapping IANA Character Sets to Java Character Sets.

The following table describes the elements you can define within a element

Element

Required/
Optional

Description

Required

Specifies the IANA character set name that is to be mapped to the Java character set specified by the element.

Required

Specifies the Java characters set to use.

.

 


virtual-directory-mapping

Use the virtual-directory-mapping element to specify document roots other than the default document root of the Web application for certain kinds of requests, such as image requests. All images for a set of Web applications can be stored in a single location, and need not be copied to the document root of each Web application that uses them. For an incoming request, if a virtual directory has been specified servlet container will search for the requested resource first in the virtual directory and then in the Web application’s original document root. This defines the precedence if the same document exists in both places.

Example:

The following table describes the elements you can define within the virtual-directory-mapping element.

Element

Required/
Optional

Description

Required

Specifies a physical location on the disk.

<url-pattern>

Required

Contains the URL pattern of the mapping. Must follow the rules specified in Section 11.2 of the Servlet API Specification.

The WebLogic Server implementation of virtual directory mapping requires that you have a directory that matches the url-pattern of the mapping. The image example requires that you create a directory named images at c:/usr/gifs/images. This allows the servlet container to find images for multiple Web applications in the images directory.

 


url-match-map

Use this element to specify a class for URL pattern matching. The WebLogic Server default URL match mapping class is weblogic.servlet.utils.URLMatchMap, which is based on J2EE standards. Another implementation included in WebLogic Server is SimpleApacheURLMatchMap, which you can plug in using the url-match-map element.

Rule for SimpleApacheURLMatchMap:

If you map *.jws to JWSServlet then

http://foo.com/bar.jws/baz will be resolved to JWSServlet with pathInfo = baz.

Configure the URLMatchMap to be used in weblogic.xml as in the following example:

<url-match-map>
    weblogic.servlet.utils.SimpleApacheURLMatchMap
</url-match-map>

 


security-permission

The security-permission element specifies a single security permission based on the Security policy file syntax. Refer to the following URL for Sun's implementation of the security permission specification:

http://java.sun.com/j2se/1.3/docs/guide/security/PolicyFiles.html#FileSyntax

Disregard the optional codebase and signedBy clauses.

For example:

<security-permission-spec>
     grant { permission java.net.SocketPermission "*", "resolve" };
</security-permission-spec>

where:

permission java.net.SocketPermission is the permission class name.

"*" represents the target name.

resolve indicates the action.

 


context-root

The context-root element defines the context root of this stand-alone Web application. If the Web application is part of an EAR, not stand-alone, specify the context root in the EAR’s META-INF/application.xml file. A context-root setting in application.xml takes precedence over context-root setting in weblogic.xml.

Note that this weblogic.xml element only acts on deployments using the two-phase deployment model.

The order of precedence for context root determination for a Web application is as follows:

  1. Check application.xml for context root; if found, use as Web application’s context root.
  2. If context root is not set in application.xml, and the Web application is being deployed as part of an EAR, check whether context root is defined in weblogic.xml. If found, use as Web application’s context root. If the Web application is deployed standalone, application.xml does not come into play and the determination for context-root starts at weblogic.xml and defaults to URI if it is not defined there.
  3. If context root is not defined in weblogic.xml or application.xmll, then infer the context path from the URI, giving it the name of the value defined in the URI minus the WAR suffix. For instance, a URI MyWebApp.war would be named MyWebApp.
Note:The context-root element cannot be set for individual Web applications in EAR libraries. It can only bet set for Web application libraries.

 


wl-dispatch-policy

Use the wl-dispatch-policy element to assign the Web application to a configured work manager by identifying the work manager name. This Web application-level parameter can be overridden at the individual servlet or jsp level by using the per-servlet-dispatch-policy element.

 


servlet-descriptor

Use the servlet-descriptor element to aggregate the servlet-specific elements.

The following table describes the elements you can define within the servlet-descriptor element.

Element

Required/
Optional

Description

Required

Specifies the servlet name as defined in the servlet element of the web.xml deployment descriptor file.

Optional

Contains the name of a principal against the run-as-role-name defined in the web.xml deployment descriptor.

Optional

Equivalent to run-as-principal-name for the init method for servlets. The identity specified here should be a valid user name in the system. If is not specified, the container uses the run-as-principal-name element.

Optional

Equivalent to run-as-principal-name for the destroy method for servlets. The identity specified here should be a valid user name in the system. If is not specified, the container uses the run-as-principal-name element.

Optional

This is a deprecated element. Used to assign a given servlet to a configured execute-queue by identifying the execute queue name. This setting overrides the Web application-level dispatch policy defined by wl-dispatch-policy.

 


work-manager

The element is a sub-element of the element. You can define the following elements within the element.

Element

Required
Optional

Description

name

Required

Specifies the name of the Work Manager.

response-time-request-class / fair-share-request-class / context-request-class / request-class-name

Optional

You can choose between the following four elements:

response-time-request-class—Defines the response time request class for the application. Response time is defined with attribute goal-ms in milliseconds. The increment is ((goal - T) Cr)/R, where T is the average thread use time, R the arrival rate, and Cr a coefficient to prioritize response time goals over fair shares.

fair-share-request-class—Defines the fair share request class. Fair share is defined with attribute percentage of default share. Therefore, the default is 100. The increment is Cf/(P R T), where P is the percentage, R the arrival rate, T the average thread use time, and Cf a coefficient for fair shares to prioritize them lower than response time goals.

context-request-class—Defines the context class. Context is defined with multiple cases mapping contextual information, like current user or its role, cookie, or work area fields to named service classes.

request-class-name—Defines the request class name.

min-threads-constraint, min-threads-constraint-name

Optional

You can choose between the following two elements:

min-threads-constraint—Used to guarantee a number of threads the server allocates to requests of the constrained work set to avoid deadlocks. The default is zero. A min-threads value of one is useful, for example, for a replication update request, which is called synchronously from a peer.

min-threads-constraint-name—Defines a name for the min-threads-constraint element.

max-threads-constraint, max-threads-constraint-name

Optional

You can choose between the following two elements:

max-threads-constraint—Limits the number of concurrent threads executing requests from the constrained work set. The default is unlimited. For example, consider a constraint defined with maximum threads of 10 and shared by 3 entry points. The scheduling logic ensures that not more than 10 threads are executing requests from the three entry points combined.

max-threads-constraint-name—Defines a name for the max-threads-constraint element.

capacity, capacity-name

Optional

You can choose between the following two elements:

capacity—Constraints can be defined and applied to sets of entry points, called constrained work sets. The server starts rejecting requests only when the capacity is reached. The default is zero. Note that the capacity includes all requests, queued or executing, from the constrained work set. This constraint is primarily intended for subsystems like JMS, which do their own flow control. This constraint is independent of the global queue threshold.

capacity-name—Defines a name for the capacity element.

 


logging

The element is a sub-element of the element. You can define the following elements within the element.

Element

Required
Optional

Description

log-filename

Required

Specifies the name of the log file. The full address of the filename is required.

logging-enabled

Optional

Indicates whether or not the log writer is set for either the ManagedConnectionFactory or ManagedConnection. If this element is set to true, output generated from either the ManagedConnectionFactory or ManagedConnection will be sent to the file specified by the log-filename element.

Failure to specify this value will result in WebLogic Server using its defined default value.

Value Range: true | false

Default Value: false

rotation-type

Optional

Sets the file rotation type.

Values are bySize, byName, none

  • bySize—When the log file reaches the size that you specify in file-size-limit, the server renames the file as FileName.n.
  • byName—At each time interval that you specify in file-time-span, the server renames the file as FileName.n. After the server renames a file, subsequent messages accumulate in a new file with the name that you specified in log-filename.
  • none—Messages accumulate in a single file. You must erase the contents of the file when the size is unwieldy.

Default Value: bySize

number-of-files-limited

Optional

Specifies whether the number of files that this server instance creates to store old messages should be limited. (Requires that you specify a rotation-type of bySize). After the server reaches this limit, it overwrites the oldest file. If you do not enable this option, the server creates new files indefinitely and you must clean up these files as you require.

If you enable number-of-files-limited by setting it to true, the server refers to your rotationType variable to determine how to rotate the log file. Rotate means that you override your existing file instead of creating a new file. If you specify false for number-of-files-limited, the server creates numerous log files rather than overriding the same one.

Value Range: true | false

Default Value: false

file-count

Optional

The maximum number of log files that the server creates when it rotates the log. This number does not include the file that the server uses to store current messages. (Requires that you enable number-of-files-limited.)

Default Value: 7

file-size-limit

Optional

The size that triggers the server to move log messages to a separate file. (Requires that you specify a rotation-type of bySize.) After the log file reaches the specified minimum size, the next time the server checks the file size, it will rename the current log file as FileName.n and create a new one to store subsequent messages.

Default Value: 500

rotate-log-on-startup

Optional

Specifies whether a server rotates its log file during its startup cycle.

Value Range: true | false

Default Value: true

log-file-rotation-dir

Optional

Specifies the directory path where the rotated log files will be stored.

rotation-time

Optional

The start time for a time-based rotation sequence of the log file, in the format k:mm, where k is 1-24. (Requires that you specify a rotation-type of byTime.) At the specified time, the server renames the current log file. Thereafter, the server renames the log file at an interval that you specify in file-time-span.

If the specified time has already past, then the server starts its file rotation immediately.

By default, the rotation cycle begins immediately.

file-time-span

Optional

The interval (in hours) at which the server saves old log messages to another file. (Requires that you specify a rotation-type of byTime.)

Default Value: 24

 


library-ref

The library-ref element references a library module, which is intended to be used as a Web application library in the current Web application.

Example:

    WebAppLibraryFoo            <exact-match>false</exact-match>

Environment

  • JBoss Enterprise Application Platform (EAP)

Issue

  • While trying to migrate the war files of WebLogic to JBoss EAP6 what all changes are required in weblogic.xml
  • What are the equivalent tags in JBoss related to the following tags of "weblogic.xml"

Resolution

  • In order to change the context root of your Web Application you can use the

Regarding Context root Tag of weblogic.xml:

Regarding

  • In JBoss we need not to define the following kind of Role Mapping which is done in Weblogic (weblogic.xml):
  • As in JBoss EAP6 we use the "RoleMappingLoginModule" in the EAP6 configuration like "standalone-full.xml", "domain.xml"...etc.
  • In your "WEB-INF/jboss-web.xml" you will need to map your Security-domain as following:

Regarding

  • In JBoss the Classes present inside the "WEB-INF/lib" Jars and inside the "WEB-INF/classes" will always be loaded from inside the Web Application only as WAR has it's own scoped class loader. I do not see any alternative/relative configuration in JBoss EAP6 for tag

Regarding

  • In JBoss EAP6 configuration like "standalone-full.xml", "domain.xml"...etc we can add the JSP configuration inside the "web" subsystem as following:

Regarding

  • In JBoss you can use "WEB-INF/web.xml", Here we can add the following in order to set Session timeout. However i do not see any exact replacement of WebLogic's
    parameter.

This solution is part of Red Hat’s fast-track publication program, providing a huge library of solutions that Red Hat engineers have created while supporting our customers. To give you the knowledge you need the instant it becomes available, these articles may be presented in a raw and unedited form.